The control unit REOVIB MTS 620 is a phase-angle controller for regulating of the conveying speed of vibratory feeders. All parameters can be entered via an LED display integrated in the front panel.
User specific settings can be stored and recalled. The device is available in IP20.
Direct Technical Support:
Highlights
Technical Details
Highlights
Unique Selling Point
- LED display
- Possibility of connecting an external thermal contact for temperature monitoring of the magnets (as an option)
- Interchangeable fieldbus interface
The REOVIB MTS 620 can be configured according to your requirements
Technical Detail
Input voltage | 230V, 400V, 480V switchable |
mains frequency | 50 / 60 Hz +/- 3 Hz |
Output voltage | 210V, 360V, 430V |
Output current | 25A |
Vibration frequency 50Hz | 25Hz, 33,3HZ, 50Hz, 100Hz |
Vibration frequency 60Hz | 30Hz, 40HZ, 60Hz, 120Hz |
Setpoint setting | LED display, 0…10V, 0…20mA, 4…20mA |
Status signal | Relay changer 250 V, 1A |
Ready signal | Relay changer 250 V, 1A |
Ext. release | 24 V DC, switch |
Umin / Umax setting | LED display |
Soft start | adjustable 0…60 sec. |
Soft stop | adjustable 0…60 sec. |
Sensor supply | 24 V DC (optional) |
Level control/switching circuit | PNP, 24 V DC (optional) |
Coarse/fine control (optional) | x |
Selectable cycle operation (optional) | x |
Mains voltage compensation | x |
Connection for thermal contact for | x |
Magnet temperature monitoring (optional) | x |
Fieldbus interfaces | EtherNet/IP, EtherCat, CAN-Bus, Profibus-DP, DeviceNet, Profinet |
Conformity | CE, RoHS |
Protection class | IP20 |
Ambient temperature | 0…40 °C |