High performance robots for painting large work pieces like automobile bodies, bumpers, construction or equipment.
The smooth arm design with a large hollow diameter is optimal for tubing and can prevent interferences among paint and air tubes.
The MOTOMAN MPX1950 painting robot provides a payload of 7 kg, which enables mounting of multiple guns and bells on this medium-sized robot.
Using the leakage compensation method to achieve positive pressure inside the enclosure, less air during operation is required, compared to the conventional air flow method. The MOTOMAN MPX1950 can be mounted on the floor, wall or ceiling and has two selectable access points for power cables.
The MOTOMAN MPX1950 is controlled by the high-performance MOTOMAN DX200 controller, which is available with optional Functional Safety Unit (FSU) that offers a wide range of new safety functions.
KEY BENEFITS
- Payload up to 7 kg for mounting multiple guns and large bells
- Elegant design for optimal tubing and prevention of interferences
- Optimized accuracy
- Pressurized enclosure for explosion protection
- Leakage compensation method to achieve positive pressure
- Requires less air than other air flow methods
- Flexible mounting options – Floor, wall, ceiling
- Two selectable access points for power cables (from back and bottom)
- Optimized range of motion, S/L axis designed with no offset for effective use of area under the arm and closer installation of the robot arm to a work piece
| NUMBER OF AXES 6 | PAYLOAD 7 kg | MAX. WORKING RANGE 1,450 mm | REPEATABILITY 0.15 mm |
| WEIGHT 265 kg | POWER SUPPLY 2.5 kVA | S AXIS 180 °/sec | L AXIS 180 °/sec |
| U AXIS 180 °/sec | R AXIS 360 °/sec | B AXIS 400 °/sec | T AXIS 500 °/sec |
| MOUNTING OPTIONS Ceiling, Wall, Floor | CONTROLLERS DX200 |
You may also interested to see these products:
