REOVIB WI 211
AC-MAGNET, CONFIGURABLE VOLTAGE/FREQUENCY AC Magnets are intended for installation in vibrating conveyor systems that are used in material supply and conveying engineering technology.
REOVIB Accelerometers SW
IP 54, IP 65 – DIE-CAST ALUMINUM REOVIB acceleration sensors contain a piezoelectric accelerator element with a downstream amplifier. The accelerations are recorded by the piezo element and are translated into a voltage proportional to the acceleration. The sensors could for example be used for the regulation and monitoring of conveyor drives, for the recording […]
REOVIB MFS 158
IP 54 or IP 20, frequency-control Frequency converters in the REOVIB MFS 158 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material – completely independently of the mains input frequency.
REOVIB MFS 268 HP
IP 54 oder IP 20, high-power version High-power version of the REOVIB MFS 268 frequency-control device, can be used for mains voltages of 400 V with max. 8 or 16A output current and for mains voltages of 230 V with max. 12, 16, 32A output current. Available as IP20 versions for installation in control cabinets and also […]
REOVIB MFS 168
IP 54 OR IP 20, FREQUENCY-CONTROL WITH AUTOMATIC DETECTION OF THE RESONANTFREQUENCY Frequency controllers in the REOVIB MFS 168 range for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material – independently of the mains input frequency.
REOVIB MFS 268
IP 54 OR IP 20, FREQUENCY-CONTROL WITH AUTOMATIC DETECTION OF THE RESONANTFREQUENCY Frequency converters in the REOVIB MFS 268 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material – completely independently of the frequency of the electrical mains supply.
REOVIB MFS 368
IP54 OR IP20, IIOT-READY The REOVIB MFS 368 series of frequency inverters offer the possibility of operating the vibratory feeder at an optimum vibratory frequency for the material to be processed – with a wide input voltage range from 110V to 230V and completely independent of the frequency of the supplying electricalnetwork. In addition, it […]
REOVIB MTS 610
IP 20, SINGLE CHANNEL CONTROL Single-channel control device in IP 20 module for mounting in a control cabinet with an output current of max. 25 A with many possibilities to adjust the oscillation frequency (16,6 / 25 / 33,3 / 50/ 100 Hz (20 / 24 / 40 / 60 / 120 Hz)
REOVIB MTS 620
The control unit REOVIB MTS 620 is a phase-angle controller for regulating of the conveying speed of vibratory feeders. All parameters can be entered via an LED display integrated in the front panel. User specific settings can be stored and recalled. The device is available in IP20.
REOVIB MTS 443/443 LCD
IP 54, THREE-CHANNEL CONTROL The REOVIB MTS 443 control device has three power outputs that can be linked according to the the application requirements (e.g. hopper, bowl and linear conveyors). Various sensor and valve logic can also be programmed. All parameters can be input via a display integrated into the faceplate. Application-specific settings can be stored and […]
REOVIB MTS 442
IP 54, Two-channel control The REOVIB MTS 442 control device has two power outputs that can be linked according to the the application requirements (e.g. bowl and linear conveyors). All parameters can be input via a display integrated into the faceplate. Connections with other equipment in the REOVIB MTS series can be implemented quickly and easily. Application-specific […]
REOVIB MTS 441
IP 54 or IP 20, Single-channel control The REOVIB MTS 441 control device enables the desired conveyor speed and all control parameters can be set via a display integrated into the faceplate. Connections with other equipment in the REOVIB MTS series can be implemented quickly and easily. Application-specific settings can be stored and retrieved when required. The […]
